+86 18031853227

+86 18031853227

Packaging film repair method

Packaging film is widely used in the packaging of many export products. It is a very popular packaging product now, which also comes from its good use effect. When we use it, we sometimes encounter damage to the packaging film due to various reasons. Sometimes it does not meet the requirements to replace the packaging film, so is there any way to repair it? As a professional packaging film manufacturer, I will introduce it to everyone.
1. Want to repair the packaging film. First, prepare a straight and smooth wooden strip with a length of 1.5 to 2 meters, a width of 5 to 6 cm, and a height of about 8 to 10 cm. On the bench, in order to prevent the plastic from being damaged during soldering, the side flute of the wooden strip must be flattened to a smoother surface with a planer. Then, one edge of each of the two films to be bonded is aligned on the wooden strip, overlapping each other by about 4 to 5 cm.
2. When repairing the packaging film, 3 to 4 people need to operate at the same time. The third person put a piece of kraft paper or old newspaper strip with a width of 8 to 10 cm and a length of 1.2 to 1.5 m on the film that has been sewn. After covering, use a preheated electric iron to smooth one end of the wooden strip.
Experience with appropriate pressure, slowly push to the other end, the heat of the electric iron used, the downward pressure, and the speed of advance should be softened and stuck together to a certain extent after the two films under the paper are heated For the degree, then peel off the paper strip, pull the glued piece of film to the other end of the strip, and then repeatedly bond the next piece, repeating the cycle until the film is connected to the required length.
The above is the repair method for packaging film. Repairing the packaging film by this method can temporarily repair the packaging film to meet everyone's needs. It is recommended that you should replace the new packaging film product as soon as possible after the repair is completed to ensure the effect of product packaging.